Men Grips
SB200/220
1. How to take measurements
Follow the following steps:
– STRAIGHTEN THE HAND, RELAXED AND WITHOUT HYPER-EXTENSION OF THE FINGERS.
– MEASURE THE LENGTH FROM HALF OF THE SECOND FALSE OF THE MEDIUM FINGER TO THE INITIAL FOLD OF THE WRIST.
2. Table of Measures
- How to take size measurement Measure the length of the hand starting from the middle of the second phalanx of the middle finger to the initial wrist crease. The following video shows the correct measurement procedure for high bar grips.
- Fit
To check the size, put on the grip with a clean and dry hand, without applying chalk and without using it on the equipment. The three finger holes should slide to the second knuckle at most. Before use on the equipment, carefully check the size. Even a single use on the bar can permanently change the shape of the leather, the curvature, tension, creases, or holes, and may result in a significant decrease in value in the event of a return. Grips used during training, exercises, or trials on the equipment are not eligible for the voluntary commercial size exchange service.
| Lenght (mm) | Size |
|---|---|
| 105 mm | 0 ° |
| 115 mm | 1 ° |
| 125 mm | 2 ° |
| 135 mm | 3 ° |
| 145 mm | 4 ° |
| 155 mm | 5 ° |
3. Fit check
AN300/320
1. How to take measurements
Follow the following steps:
– STRAIGHTEN THE HAND, RELAXED AND WITHOUT HYPER-EXTENSION OF THE FINGERS.
– MEASURE THE LENGTH FROM HALF OF THE FIRST FALSE OF THE MEDIUM FINGER TO THE INITIAL FOLD OF THE WRIST.
2. Table of Measures
- How to take the size measurement Measure the length of the hand starting from the middle of the first phalanx of the middle finger to the initial crease of the wrist. The following video shows the correct measurement procedure for ring grips.
- Fit
To check the size, put on the grip with a clean and dry hand, without applying chalk and without using it on the equipment. The two finger holes should reach no further than the first knuckle. Before using on the apparatus, carefully check the size. Even a single use on the rings can permanently change the shape of the leather, the curvature, tension, creases, or holes, and can result in a significant decrease in value in the event of a return. Grips used during training, exercises, or trials on the equipment are not eligible for the voluntary commercial size exchange service.
| Lenght (mm) | Size |
|---|---|
| 125 mm | 0 ° |
| 135 mm | 1 ° |
| 145 mm | 2 ° |
| 155 mm | 3 ° |
| 165 mm | 4 ° |
| 175 mm | 5 ° |
3. Fit check
Women Grips
AS400/420
1. How to take measurements
Follow the following steps:
– STRAIGHTEN THE HAND, RELAXED AND WITHOUT HYPER-EXTENSION OF THE FINGERS.
– MEASURE THE LENGTH FROM HALF OF THE FIRST FALSE OF THE MEDIUM FINGER TO THE INITIAL FOLD OF THE WRIST.
2. Table of Measures
-
- How to take the size measurement Measure the length of the hand starting from the middle of the first phalanx of the middle finger to the initial wrist crease. The following video shows the correct measurement procedure for uneven bars grips.
- Fit
To check the size, put on the grip with a clean and dry hand, without applying chalk and without using it on the apparatus. The two finger holes must reach no further than the first knuckle. Before using on the apparatus, carefully check the size. Even a single use on the rings can permanently change the shape of the leather, the curvature, tension, creases, or holes, and can lead to a significant decrease in value in the event of a return. Grips used during training, exercises, or trials on the apparatus are not eligible for the voluntary commercial size exchange service.
| Lenght (mm) | Size |
|---|---|
| 115 mm | 0 ° |
| 125 mm | 1 ° |
| 135 mm | 2 ° |
| 145 mm | 3 ° |
| 155 mm | 4 ° |
| 165 mm | 5 ° |
3. Fit check
PR800
1. How to take measurements
Follow the following steps:
– STRAIGHTEN THE HAND, RELAXED AND WITHOUT HYPER-EXTENSION OF THE FINGERS.
– MEASURE THE LENGTH FROM HALF OF THE FIRST FALSE OF THE MEDIUM FINGER TO THE INITIAL FOLD OF THE WRIST.
2. Table of Measures
- How to take the size measurement Take the hand length measurement starting from the middle of the first phalanx of the middle finger to the initial wrist crease. The following video shows the correct measurement procedure for uneven bars grips model PR800/PR820
- Fit
To check the size, put on the grip with a clean and dry hand, without applying chalk and without using it on the apparatus. The two finger holes must reach no further than the first knuckle. Before using on the apparatus, carefully check the size. Even a single use on the rings can permanently change the shape of the leather, the curvature, tension, creases, or holes, and can lead to a significant decrease in value in the event of a return. Grips used during training, exercises, or trials on the apparatus are not eligible for the voluntary commercial size exchange service.
| Lenght (mm) | Size |
|---|---|
| 105 mm | 00 ° |
| 115 mm | 0 ° |
| 125 mm | 1 ° |
| 135 mm | 2 ° |
| 145 mm | 3 ° |
| 155 mm | 4 ° |
PR600
1. How to take measurements
Follow the following steps:
– STRAIGHTEN THE HAND, RELAXED AND WITHOUT HYPER-EXTENSION OF THE FINGERS.
– MEASURE THE LENGTH FROM THE INITIAL FOLD OF THE WRIST TO THE BEGINNING OF THE FINGERS (FOLLOWING THE CENTER LINE OF THE HAND).
2. Table of Measures
- How to take the size measurement Take the hand length measurement starting from the initial wrist crease to the beginning of the fingers (following the center line of the hand). The video below shows the correct measurement procedure for PR600 uneven bar grips (no dowel)
- Fit
- To verify the size, wear the grip with a clean, dry hand, without applying chalk and without using it on the apparatus. The two finger holes should reach the base of the middle finger. Before using on the apparatus, carefully check the size. Even a single use on the rings can permanently change the shape of the leather, the curvature, tension, creases, or holes, and can lead to a significant decrease in value in the event of a return. Grips used during training, exercises, or trials on the apparatus are not eligible for the voluntary commercial size exchange service.
| Lenght (mm) | Size |
|---|---|
| 53 mm | 0 ° |
| 60 mm | 1 ° |
| 70 mm | 2 ° |
| 80 mm | 3 ° |
| 90 mm | 4 ° |
| 100 mm | 5 ° |
| 110 mm | 6 ° |
Wrist support
GAF 068
1. Table of Measures
| Size | Age |
|---|---|
| S | 8 – 12 yo |
| M | 13 – over |
GAM 060/064/076
1. Table of Measures
| Size | Age |
|---|---|
| S | 8 – 12 yo |
| M | 13 – over |
Artistic gymnastic shoes
ART 010/012
1. How to take measurements
Follow the following steps:
– MEASURE FROM THE END OF THE HEEL TO THE POINT OF THE ALLUCE.
2. Table of Measures
| Lenght (mm) | Number |
|---|---|
| 192 mm | 32 |
| 199 mm | 33 |
| 205 mm | 34 |
| 211 mm | 35 |
| 217 mm | 36 |
| 223 mm | 37 |
| 230 mm | 38 |
| 238 mm | 39 |
| 245 mm | 40 |
| 252 mm | 41 |
| 258 mm | 42 |
| 264 mm | 43 |
| 271 mm | 44 |
| 278 mm | 45 |
